[email protected]

150# Flange Dimensions and Weight 150 Pound Flange

Threaded Pipe Flanges, Flange ANSI B 16.5 Class 150, Class 150 ANSI B 16.5 can be used in extremely high pressure services, particularly at or near atmospheric temperature. We offer these Threaded Pipe Flanges, Flange ANSI B 16.5 Class 150 in proper packaging to avoid any damage during the transportation. We offer a wide range of ANSI B 150 ANSI FLANGESCLASS 150 FLANGES ANSI B16.5 FORGED FLANGES 8 Unit :mm Notes:(1) For the Bore(B1) other than Standard Wall Thickness, refer to page 52. (2) Class 150 flanges except Lap Joint will be furnished with 0.06(1.6mm)raised face, which is included in Thickness(t) and Length through Hub(T1),(T2). (3)For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be

ASME B16.5 Flange, ANSI B16.5 Class 150, Class 300 Flange

PED approved ASME B16.5 Flanges Manufacturers, ANSI B16.5 Flange in Class 150, 300, 400, 600, 900, 1500 and 2500 Flanges. Check ASME B16.5 Flange Dimenisons and DIN ANSI B16.5 Flange Ansi B16 5 Class 900 Flange Dimensions, 900 Lb Pound Check 900 Lb Flange Dimensions, 900 Pound Flange Dimensions in Stock View 900 Lb Rtj Flange Dimensions, Ansi 900 Lb Flange Dimensions . Flanges are able to withstand different pressures at varying temperatures. As temperature increases, the pressure rating of the flange will decrease. BOLT & STUD DIMENSIONS FOR ANSI FLANGES900 36 32 1-1/2 215 180 32 2 325 280 28 2-1/2 400 Raised Face height of 2mm for Class 150 & 300 and 7mm for Class 600, 900, 1500 & 2500 are included in dimension L (Bolt Length). CARBON STEEL PIPE FLANGES TO ANSI B16.5 (BS 1560) FORGINGS TO ASTM A105 - Not recommended for prolonged use above 427qC

Flange Working Pressure Rating Calculator

16 rows · Flange ratings are in accordance with ASME B16.5. In this standard, flanges are classified Flanges - Hydrostatic Test PressureANSI B16.5 - Steel Pipe Flanges - Pressure and Temperature Ratings - Group 1.2 - Pressure (psig) and temperature ratings for steel pipe flanges and flanged fittings Bronze Flanges - ASME/ANSI 150 lb - Flange diameters, thickness, bolt circles, numbers and diameters of bolts for ASME/ANSI B16.15 - Cast Bronze Threaded Fittings - 150 lb Bronze Flanges - Unified Alloys

  • Stocking ProgramGeneral InformationFlange TypesSlip-on Flanges The slip-on flange is the most common flange in which Unified Alloys stocks a full line of ANSI Class 150, 300, 600,1500 & 2500 up to 24 NPS. We stock stainless grades F304/304L, 316/316L, F317/317L, F321, F347 and duplex grade 2205 ( in which they are slipped over the end(s) of pipe or the end(s) of a fitting, and welded in position. On the pipe or fitting, they are set so the inserted end of the pipe or fitting is set back to the wall plus 1/8 allowing for a fillet weld to be made inside the flPressure and Temperature Rating of ASME Flanges
    • Pressure Rating DesignationList of Material Specifications Table-1APressure Temperature Ratings TableEstablishing The Pressure-Temperature RatingsThe available pressure rating designations under ASME B16.5 are:150, 300, 400, 600, 900, 1500 and 2500. The terminology for pressure rating designation is Class followed by the dimensionless numbers stated above. Thus, the designation for pressure-temperature ratings as per ASME B16.5 are as follows:1. Class 150 2. Class 300 3. Class 400 4. Class 600 5. Class 900 6. Class 1500 7. Class 2500 The pressure-temperature ratings as per ASME B16.47 are as follows:1. Class 75 2. Class 150 3. ClasTEXAS FLANGETEXAS FLANGE PRODUCT CATALOG :VER 5.00 2 ANSI B16.5 (1/2-24)150 300 400 600 900 1500 2500 -----3 ANSI B16.5 Weights 150 300 400 600 900 1500 2500 -----10 ANSI B16.5 Flange Tolerances -----13 ANSI B16.5 Bolt and Stud Dimensions -----14 1 ANSI B16.47 Series A - Class 150, 300, 400, 600, 900

      Pressure Rating:ANSI Class vs PN - Valvias

      Coefficients Cv Kv. Flow equations. Flanges. ANSI/ASME vs ISO. Valve books. Pressure Rating ANSI Class vs Nominal Pressure (PN) ISO 7268 norm defines Nomimal Pressure for pipe components. API 6D compares also ANSI Class with PN. The pressure rating on this table do not mean design pressure (bar or Pressure Temperature Rating and Flange rating of ASME What is Flange Rating and Flange Class? ASME/ANSI B16.5 standard provides seven flange pressure ratings:150, 300, 400, 600, 900, 1500, and 2500. They are also known as Flange Class and denoted by Class, followed by anyone of the above-mentioned dimensionless numbers. They are also referred to as Pound Rating or Pressure Class Rating.Flange Bolt Chart - Size & Torque Flange Bolt Chart(1) flanges with rating class designations 150, 300, 400, 600, 900, and 1500 in sizes NPS 1/2 through NPS 24 and flanges with rating class designation 2500 in sizes NPS 1/2 through NPS 12, with requirements given in U.S. Customary units with diameter of bolts and flange