[email protected]

55 / 55 High quality structural carbon steel

55 ( 55 ) - High quality structural carbon steel:chemical composition, mechanical and physical properties, hardness Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys C55 / 1.0535 - SteelNumber - Chemical composition EN 10083-2:2006 Steels for quenching and tempering. Technical delivery conditions for non alloy steels. EN 10250-2:2000 Open steel die forgings for general engineering purposes. Non-alloy quality and special steels. Equivalent grades:Go here. Chemical composition % of steel C55 (1.0535):EN 10277-2-2008. Cr + Mo + Ni = max 0.63.

C55 |1.0535 AISI 1055S55C - Waldun Steel

C55 steel is an unalloyed medium carbon engineering steel which has 0.52%-0.6% Carbon as per EN10083 standard.It will obtain high hardness and high strength after hardening due to the relatively high carbon content,and also can be flame or induction hardened to surface hardness Min 58HRC.C55 steel is generally supplied in an untreated or normalised condition. Decomposition of cementite in pearlitic steel due to Mar 25, 2003 · Plastic deformation increases the saturation magnetisation of pearlitic steel, which suggests a change in its phase composition. Fig. 1 shows, as an example, two thermomagnetic curves for plain carbon steel with 0.7 mass% of C cold drawn by 80% of reduction in area after annealing and patenting treatments. Heating to 550600 °C leads to a decrease in magnetisation measured at room Pauly StahlhandelSteel Material C55E Data Sheet The material DIN/EN-C55E and its material properties can be viewed here on this page. On this page you will find informations about material called C55E (DIN/EN), as long as we have them .

SIQUAL 1203 Steel

SIQUAL 1203 CK55 1.1203 Ck55 C55E 1055 Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.56 max. 0.40 0.75 max. 0.40 max. 0.10 max. 0.40 - - (Cr+Mo+Ni) = max. 0.63 Description SIQUAL 1203 steel has a higher (0.55%) carbon content for greater strength than the lower carbon alloys. It is hardenable by heat treatment, quench and tempering. W-Nr 1.0535 Knife Steel Composition Analysis Graph Select steels from the Interactive Knife Steel Composition Chart. Generated 64848706 times. 1.0535 (W-Nr) - Simple carbon steel. Low wear resistance, decent shock resistance. Suitable for large or throwing knives where impact strength is desired.C55E(1.1203) 1055 Ck55 S55C XC54 070M55 C55 Chemical Composition. C55E - 1.1203. C:0.52 - 0.66:Si:max 0.40:Mn:0.60 - 0.90:Ni:max 0.40:P:max 0.030:S:max 0.035:Cr:max 0.40:Mo:max 0.10