Iron-base alloy:KTA800:INCOLOY 800:32Ni-21Cr-Fe:Strong in stress corrosion cracking and the sulfur attack :Heat exchanger, Parts for petrochemistry and heating furnace. KTA825:INCOLOY 825:42Ni-22Cr-3Mo-Fe:Good corrosion resistance in a severe corrosive environment such as sulfuric acid and seawater:Equipment for chemical industry and INCOLOY - Alloy ValvesAlloy 825 offers exceptional resistance to corrosion by sulphuric and phosphoric acids and is often the most cost effective alloy in sulphuric acid service. Pressure Vessels Incoloy 825 is approved for pressure vessel operating temperatures up to 525°C (AS1210, AS4041), 538°C (ASME Boiler & Pressure Vessel Code, Sections I, III, VIII, IX, Cases 1936, N-188).
The Incoloy 800, 800H, 800T is widely popular among the market for fabricating good quality of heat condensers. The properties exhibited by them are excellent corrosion resistance, pitting resistance to chloride environment, crevice corrosion resistance, stress crack corrosion resistance and Incoloy DS nickel based alloy supplier HARALD PIHL Oct 29, 2018 · INCOLOY alloy DS, in common with other Special Metals Corporation heat-resisting alloys, develops a tightly adherent oxide film that protects its surface against corrosion processes. It is also resistant to green rot which can occur in nickel-chromium alloys when atmospheres vary between reducing and oxidizing, and in some cases where the Incoloy Wire, Incoloy 800 Wire, Incoloy 825 WireIncoloy 800H wire or 800 HT wire are used for service requiring optimum creep and rupture properties. The high contents of nickel and chromium in the alloys also give good corrosion resistance. Incoloy 800 is a solid solution strengthened alloy of nickel, chromium and iron with small additions of
Incoloy® 800 Incoloy® 800 is manufactured for applications that require a higher creep-rupture strength and corrosion resistance in highly acidic environments. Incoloy® 800 also offers the high temperature oxidation and carburization resistance qualities that Incoloy® is best known. Incoloy® 825 The use of INCOLOY 825 in the oil and gas industryThe latter of these two, INCOLOY alloy 825, is a nickel-iron-chromium alloy, with the significant additions of molybdenum and a small amount of titanium (0.6-1.2%). The alloy is considered the forerunner of modern alloys that contain molybdenum, which imparts strength into the alloy, as well as resistance to pitting and crevice corrosion.Incoloy Alloy 800 supplier and 800H/ 800HT Chemical The Incoloy 800HT contains 0.5% titanium in the composition. As a result, the Alloy 800HT has higher creep resistance and strength than the 800H. The Incoloy 800 chemical composition makes it oxidation resistant and carburization resistant under high temperatures.