A nickel-chromium-molybdenum-niobium aged hardenable grade, Alloy 725 has extremely high strength. With addition of aluminium and titanium, Alloy 725 has high strength, ductility and toughness. In addition, the alloy has high corrosion resistance including resistance to hydrogen embrittlement and stress corrosion cracking. Corrosion Resistance of Inconel trademark Alloy 725 CORROSION RESISTANCE OF INCONELB alloy 725 WELD OVERLAY Edward L.Hibner and D.B.O'Donnell Into Alloys International, Inc. Huntington, W 25720 Abstract Alloy 725 (UNS N07725) is a highly corrosion resistant alloy capable of being age hardened to 0.2% yield strengths of above 827 MPa.
Image:Alloy depletion, elevated temperature oxidation, progressive cracking and recrystallized grains in Inconel 725 (UNS N07725) Metallography Services UK W e are a test laboratory specialised in microstructure examination, metallurgical failure analysis and on-site microstructure replication (including residual life replication assessment in Inconel 725 Screw, Inconel 725 ASTM B805 Screw Strength of Alloy 725 Screws is developed by heat treatment rather than by cold work this also enables strength to be imparted to large non-uniform sections that cannot be strengthened by cold works. Also known as UNS N07725 Screws, these A725 is used for hangers, landing nipples and high strength fasteners in marine applications. Inconel 725 from China manufacturer - Taixin Steel Co Inconel 725 offered by China manufacturer Taixin Steel Co., Limited. Buy Inconel 725 directly with low price and high quality.
INCONEL® alloy 725 (UNS N07725) is a nickel- chromium-molybdenum-niobium alloy that is highly resistant to corrosion and is age hardenable for extremely high strength. It has essentially the same corrosion resistance as INCONEL® alloy 625, which is widely used in a broad range of severely corrosive environments. Nickel Alloy Inconel 625 UNS N06625 - HY IndustryHY 625 Material grades and equivalents Inconel 625/ GB NS336 / UNS N06625/ SEW VDIUV W.Nr.2.4856 NiCr22Mo9Nb / BS NA 12 / AFNOR NC22DNB HY 625 Chemical composition Alloy % Ni Cr Mo Nb+N Fe Al Ti C Mn Si Cu P S 625 Min. 58 20 8 3.15 Max Nickel Alloy Inconel 725 UNS N07725 - HY IndustryHY 725 / Inconel 725 / UNS N07725 is highly resistant to corrosion and is age hardenable for extremely high strength. The strength of this alloy is developed by heat treatment to achieve high ductility and toughness. The alloy is resistant to hydrogen embrittlement and stress-corrosion cracking. Fob price:US $ 25 - 80 / Kilogram
Phone:+1 (413) 370-0340 6606 De Moss Drive #1505, Houston, TX 77074 Email:[email protected] UNS (Unified Number System) Cross Reference List - Unified UNS (Unified Number System) Cross Reference List *Inconel 725 N07725 203 EZ Almar, E-Brite AL Tech Specialty Steel Corp. 253MA 3RE60, 316UG, SAF 2205, SAF 2304, SX, SAF 2507, Sanicro 28 Sandvik Steel 254SMO 654SMO Avesta Sheffield 4565S Thyssen Stahl ACI Alloy Casting Institute UNS N07725 (Inconel 725) - HY industryUNS N07725/Inconel 725 is a nickelchromium-molybdenum-niobium alloy that is highly resistant to corrosion and is age hardenable for extremely high strength. It has essentially the same corrosion resistance as INCONEL alloy 625, which is widely used in a
VRC725 (Alloy 725 / ASTM B637 & B805 / UNS N07725) Nickel Alloy This is an alloy of high resistance to corrosion and high mechanical strength. The corrosion resistance is similar to that of the 625 alloy, but its mechanical strength is twice Alloy 725 (UNS N07725) - Langley Alloys LtdMay 02, 2017 · Alloy 725 is a nickel-chromium alloy with significant additions of molybdenum, niobium and titanium. It can be supplied in the hot worked, annealed and age-hardened condition. It is age-hardened to achieve extremely high strength, approximately twice that of Alloy 625 in the annealed condition, through the precipitation of phase during a