[email protected]

1.4541 - M.Woite GmbH

Stainless steels Part 1:List of stainless steels:DIN EN 10088-3 (09/2005) stainless steels.Technical delivery conditions for semi-finished products,bars,rods,wire selection and bright products of corrosion resisting steels for general and construction purposes:DIN EN 10217-7:Welded steel pipes under compression load Pipes made from 1.4541, AISI 321, 1.4878, AISI 321H - stainless steel1.4541, X6CrNiTi18-10, AISI 321 - specifications and applications. Chrome-nickel stainless steel with addition of titanium with increased hardness, elasticity, maintaining non-magnetic properties, resistance to intergranular corrosion and increased temperatures. It is characterized by significant resistance to nitric acid, nitric acid salts in

321 Stainless Steel (1.4541) Data Sheet - Nationwide

  • OverviewForm of SupplyCorrosion ResistanceRelated Specs & Trade NamesGrade 321 stainless steel (1.4541) is a heat resistant grade supplied into numerous industry sectors. The key property of this grade is the added titanium content (5 x C%) stabilising the material and making its resistance to carbide precipitation when exposed to high temperatures and resistance to oxidation its main characteristics. Whilst retaining good strength and corrosion resistance when exposed to high temperatures, this grade of stainless steel like most austenitic grades will also maintain its strength anCore 321/4541 EN 1.4541, ASTM TYPE 321 / UNS S32100 Core 321/4541 is an austenitic stainless steel that belongs to the standard CrNi stainless steel family. Core 321/4541 can be welded in all dimensions without becoming susceptible to intergranular corrosion. The austenitic CrNi standard grades are the most widely used group of stainless steels. Their well-balanced material properties make them Chemical composition of stainless steel flat products for Introduction BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 97 stainless steel grades are listed, including 25 ferritic, 14 martensitic, 2 precipitation hardening, 44 austenitic and 12 austenitic-ferritic (duplex) grades. DIN EN 1.4571 Material, X6CrNiMoTi17-12-2 Stainless SteelDIN EN 1.4571 material (X6CrNiMoTi17-12-2) is made by adding titanium (Ti) to EN 1.4401 stainless steel (X5CrNiMo17-12-2) to improve the resistance to intergranular corrosion. ium can improve the corrosion resistance of stainless steel, especially intergranular corrosion, effectively prevent the sensitization of stainless steel, and also

    EN 1.4541 (X6CrNiTi18-10) Stainless Steel ::MakeItFrom

    May 30, 2020 · EN 1.4541 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 1.4541 is the EN numeric designation for this material. X6CrNiTi18-10 is the EN chemical designation. The properties of EN 1.4541 stainless steel include three common variations. This page shows summary ranges across all of them. Stainless Steel - Stealth 316EN10088-2 Replaces BS1449-Part 2:1983 EN10059 Covers Heat Resisting Grades 2 Stainless Steel Grades, Compositions & Typical Mechanical Properties 1.4541 321S31 321 58B 0.08x 18 9 . 0.5Ti 200-250 500-720 40 1.4550 347S31 347 58F 0.08x 18 9 . 0.5Nb 200-250 500-720 40 Stainless Steel:Tables of Technical PropertiesCare was taken to include as much information as possible about stainless steel flat products used throughout Europe, for the informatio n of the user: Chemical and physical properties are in accordance with EN 10088-1:2005 Mechanical properties are in accordanc e with EN 10088-2:2005, except for he at resisting grad es (EN 100 95:1999)

    EN 10088 Stainless steels - Grades/Numbers - Steel Number

    EN 10088:Steel grades /numbers. EN 10088-1:2005 Stainless steels. List of stainless steels. EN 10088-2:2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes. EN 10088-3:2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire