[email protected]

1.4541 (AISI 321), S32100 Datasheet METALCOR

S32100. Description. 1.4541 / AISI 321 is an austenitic chromium-nickel-stainless steel, stabilized with titanium. Special properties. Good corrosion resistance to low content of hydrochloric and organic acids. Chemical Composition. C. %. 0.08. 321 Stainless Steel (1.4541) Data Sheet - Nationwide

  • OverviewForm of SupplyCorrosion ResistanceRelated Specs & Trade NamesGrade 321 stainless steel (1.4541) is a heat resistant grade supplied into numerous industry sectors. The key property of this grade is the added titanium content (5 x C%) stabilising the material and making its resistance to carbide precipitation when exposed to high temperatures and resistance to oxidation its main characteristics. Whilst retaining good strength and corrosion resistance when exposed to high temperatures, this grade of stainless steel like most austenitic grades will also maintaiSynthesis, Electrochemical, Thermodynamic, and Quantum
    • AbstractIntroductionExperimentalResultsConclusionData AvailabilityThe corrosion of stainless steel is one of the major industries issues that gained wide interest among researchers. It became necessary to develop and apply eco-friendly approaches to corrosion control. This work explores the inhibitory effect of a newly synthesized amino cadalene (ACM) on the corrosion of stainless steel type 321 in sulfuric acid 1M. Particularly, the experimental study consisting of electrochemical and surface analyses was conducted in conjunction with a theoretical approach. The elWhat is alloy sensitization? - Rolled Alloys, Inc.A third option is the stainless steel have reduced carbon content below 0.03 percent so that insufficient carbon is available for carbide formation. Many stainless grades have a

      321 Stainless Steel - Engineering Materials

      Type 321 stainless steel is a variation of grade 304 with the addition of titanium as a stabiliser. The alloy is resistant to intergranular corrosion and can be easily welded and formed. 321 Stainless Steel, 321 SS, Grade 321 - Permanent SteelType 321 can be readily formed and drawn, however, higher pressures are required and more springback is encountered than for carbon steel and ferritic stainless steels. AISI 321 Stainless Steel Stainless Steel Special Alloy 321Stainless 321 is a chromium-nickel steel which was developed with improved intergranular-corrosion resistance. Stainless 321 is resistant to atmospheric corrosion, sterilizing solutions, many organic chemicals, and a wide variety of inorganic chemicals.

      STAINLESS STEELS FOR MACHINING - Nickel Institute

      AvailabilityThe final step in the selection /specification process is to determine the availability of the candidate material(s). Depending on the quantity involved, an inquiry can be prepared and submitted to a steel service center or directly to a mill that produces stainless steel. Specification Sheet:Alloy 321/321H - Sandmeyer SteelAlloy 321 does not perform well in chloride solutions, even in small concentrations, or in sulfuric acid service. Fabrication Data Alloy 321 can be easily welded and processed by standard shop fabrication practices. Machining The cold work hardening rate of 321 makes it less machinable than 410 stainless steel, but similar to 304. Stainless Steel 321 - Alloy Wire InternationalStainless Steel 321 has similar composition to 304 Stainless Steels but with addition of ium. Stainless Steel 321 is also known as AISI 321, Nirosta 4541, Polarit 731, and Remanit 4541. The above tensile strength ranges are typical. If you require different please ask.

      Stainless Steel Type 321 Rolled Metal Products

      Description Type 321 is a titanium stabilized chromium nickel austenitic stainless steel with corrosion resistance similar to 304/304L. This grade is typically used in the 800-1500F temperature range where it is stabilized against chromium carbide precipitation by the addition of titanium, which results in the precipitation of titanium carbides.