[email protected]

316L Grade Stainless Steel (1.4404 to EN 10088)

304 Grade Stainless Steel (1.4301 to EN 10088) F 316L Grade Stainless Steel (1.4404 to EN 10088) Material:Austenitic stainless steel. 17% Cr. / 11% Ni. / 2% Mo. Tensile Strength N/mm²:530 Minimum. 0.2% Proof stress N/mm:240 Minimum. Elongation %:40 Core 305/4303 EN 1.4303, ASTM TYPE 305 / UNS S30500 Core 305/4303 is an austenitic stainless steel that belongs to the standard CrNi stainless steel family. It has 12.5 wt.-% nickel for improved formability. The austenitic CrNi standard grades are the most widely used group of stainless steels. Their well-balanced material properties make them suitable for the fabrication of many products.

DIN EN 1.4301 Stainless Steel X5CrNi18-10 Material

EN 1.4301 Stainless Steel (X5CrNi18-10) DIN EN 1.4301 stainless steel (X5CrNi18-10) is a conventional austenitic stainless steel with good resistance to atmospheric, organic and inorganic chemicals. This material is widely used due to its excellent intergranular corrosion resistance, good cold deformability, good deep drawability and weldability. EN 1.4303 - Equivalent MaterialsEN 1.4303 Steel. Stainless Steel Austenitic Stainless Steel. Structural Steel. Equivalent Materials to EN 1.4303. Download equivalents as an Excel file Some equivalent materials may be stricter whereas others may be outside the bounds of the original material in selected parameters. Stainless Steel EN Standards for Cold Rolledreplaced by 1.4301 EN 10088-2 states that Class A thickness tolerances shall normally be produced Surface Finish Standards have been extended and some changed Material Certification Where multi-certification is required, a combination of EN10088-2, EN10029 or 10051 will appear together with the appropriate ASTM Standards.

Stainless Steel - Austenitic - 1.4301 (304) Sheet and

Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel. Stainless Steel Grades - structuralprecastA2 - Chromium-nickel steel (grade 304/1.4301) suitable for rural, urban and light industrial. A4 - Chromium-nickel-molybdenum steel (grade 316/1.4401) suitable for industrial and coastal areas. The grades given are not true equivalents as they are strengths whilst the letters are for stainlessness. Stainless steel flat products for building the grades in 2 STAINLESS STEEL FLAT PRODUCTS FOR BUILDING THE GRADES IN EN 1 0 0 8 8 - 4 EXPLAINED Table of contents of EN 10088-4 Note:In this publication, the paragraphs marked in dark blueare specifically expanded on.

Surface Finish:1U 1C 1E 1D 1X 1G 2A 2H 2C 2D 2E 2B 2G 2P

1.4104 Stainless Steel X14CrMoS17 Material Properties Equivalent, QT650 European EN Standards - BSI and DIN Standards DIN EN 1.4057 Stainless Steel X17CrNi16-2 Material QT800 QT900Austenitic Stainless Steel Grades Comparison Chart Austenitic Stainless Steel Grades Comparison Chart. The table is intended to relate former BS, EN, German and Swedish grade designations to the current EN steel numbers, AISI grades and UNS numbers. The table is based on the 'wrought' ie long products (stainless steel bars etc), flat products (stainless steel plates etc) steel numbers published in EN 10088 and related standards.