A53,A192,A53-B,A333-1.6,A250-T1,A209-T1,A213-T22,etc. Length:1-12m,Width:0.6-3m,Thickness:0.1-300mm,or as required. Surface:Clean,blasting and painting,etc. Features & Application - Steel Plate - Products - POSCO Steel Plate. Steel plates are hot rolled products that have a relatively high thickness. Products having a thickness of over 4.5 mm are classified as steel plates, and those having a thickness of over 100 mm are called thick steel plates. Atmospheric corrosion resistant steel is used for large on- and offshore structures including bridges
Pitting corrosion is in itself a corrosion mechanism, but is also a form of corrosion often associated with other types of corrosion mechanisms. It is characterized by a highly localized loss of metal. In the extreme case, it can appear as a deep, tiny hole in an otherwise unaffected surface. The adjacent figure illustrates the nature of Products Chubu Steel Plate Co., Ltd.It is hot-rolled steel plate for building structures with high seismic resistance. JIS G3114Hot-rolled Atmospheric Corrosion Resisting Steels for Welded Structure It is hot-rolled atmospheric corrosion resisting steel plate with a high weldability to be used for bridges, construction and other structures. RA 602 CA® - Rolled Alloys, Inc.RA 602 CA ® alloy is the most oxidation resistant/high strength nickel alloy available. It is capable of extreme temperature use up to and beyond 2200°F (1200°C). For thermal processing applications where minimal product contamination is necessary, the oxidation/scaling resistance of
A metallurgical bond between the two materials is achieved in a computer-controlled hot-rolling process. Roll-bonded clad plates are the economic solution for corrosion-resistant applications in the oil and gas production, refineries, the chemical industry as well as SA 516 Gr.70 Boiler & Pressure Vessel Steel Plates, ASTM SA 516 GR 70 & Pressure Vessel Steel Plates are known for robustness and corrosion resistant properties. These products are high in demand because of their standard working in extreme weather conditions. These kinds of plates are specially designed to provide the resistance from the oxidation and corrosion agents mainly in cold weather. Steel Plate, Floor Plate & Sheet ProductsC1020 Hot Rolled Plate C1045 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis Carbon (C) Manganese (Mn) Phosphorus (P) Sulphur (S) AISI 1045 0.43 / 0.50 0.60/ 0.90 0.04 max 0.05 max
given in ASTM A6/A6M-Section 14 for hot-rolled shapes and plates. This includes but is not limited to the steel grade and nominal sizes supplied and tension test results. This document may be in written form or, per ASTM A6/A6M-Section 14.8, transmitted electronically. ASTM A500/A500M Section 18 addresses this for HSS.304/304L Stainless Steel HRAP Plate - Speedy Metals304/304L dual certified stainless plate is a very low carbon "18-8" austenitic chromium-nickel steel with good corrosion resistance and superior resistance to intergranular corrosion following welding or stress relieving. It is produced by electric-furnace melting, hot rolled, annealed and pickled.